Engine -> Camshafts -> Audi/Seat/Skoda/Vw -> I-5cyl 2.5L 20v DOHC CBTA/CBUA
Catcams Camshafts

These camshafts are developed to increase the power and torque. The camshafts are available in many different designs and custom grindings can be manufactured after own preferences upon request.

What does the camshaft data means?

Duration: From 0.1mm or 1.0mm lift on the valve the crankshaft rotates this many degrees before the valve reaches the same lift before closing.

A longer duration often means a more aggressive camshaft. Remember a 4-valve head have a larger valve area then a 2-valve. So at the same duration the 4-valve head camshaft is more aggressive then the 2-valve.

Max valve lift: This is the maximium valve lift the camshaft make. The value is set at 0 valve clearance. High lift often means more power, if the head flows enough. On the other hand it often also requires rebuilt valve mechanism with longer springs and thin retainers. The distance between the valve and piston must also be checked.

Lift at TDC: This measure tells us how much the camshaft lift the valve at Top Dead Centre. The value is set at 0 valve clearance. High lifts often gives rough idle and increased emission levels.

Application: Tells us what application the camshaft is made for.

Sport: For street cars. Excellent low rpm-range and slightly higher rpm range then original. Often works with OEM fuel injection and OEM valve mechanism.

Hot street - Dirt track: For street/track car and race cars. Works best in mid and high rpm-range. Often demands carburetor/adjustable engine management system and rebuilt valve mechanism.

Tarmac rally - Race / Full Race: For race cars. Acceptable mid rpm-range and best in high rpm-range. Demands carburetor/adjustable engine management system and rebuilt valve mechanism.

INFO
76040xx:
- camshafts for hydraulic followers

76041xx:
- camshafts for mechanical followers

Standard Camspec
Duration 0.1mm: 237°/249°
Duration 1.0mm: 191°/201°
Max valve lift: 10,30/10,00mm
Lift at TDC: 0,00 (2,64)/0,45mm
Camshafts, 237°/249° Camshafts, 237°/249°
Prodnr: 7604000

Hydro: Standard

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 246°/255° Camshafts, 246°/255°
Prodnr: 7604001

Hydro: Sport

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 262°/259° Camshafts, 262°/259°
Prodnr: 7604003

Hydro: Sport

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 270°/263° Camshafts, 270°/263°
Prodnr: 7604004

Hydr: Sport

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 278°/270° Camshafts, 278°/270°
Prodnr: 7604101

Mech: Hot street - Dirt track

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 279/271° Camshafts, 279/271°
Prodnr: 7604002

Hydr: Rally & Cross

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 286°/278° Camshafts, 286°/278°
Prodnr: 7604102

Mech: Hot street - Dirt track

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 292°/280° Camshafts, 292°/280°
Prodnr: 7604103

Mech: Tarmac rally - Race

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 292°/286° Camshafts, 292°/286°
Prodnr: 7604106

Mech: Turbo

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 292°/286° Camshafts, 292°/286°
Prodnr: 7604107

Mech: Turbo

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 302°/300° Camshafts, 302°/300°
Prodnr: 7604104

Mech: Tarmac rally - Race

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Camshafts, 318°/302° Camshafts, 318°/302°
Prodnr: 7604105

Mech: Full Race

MSRP: 10148 SEK excl. VAT
Price: 9472 SEK excl. VAT
Cart
Varukorg
0 products in cart
Disruption
We currently have some disruptions in the web shop.

See the start page for more information.
Search products
Search product:
Currency converter
1 SEK = 0,098 EUR
1 SEK = 0,084 GBP
1 SEK = 0,116 USD

Or use THIS converter!
Contact info
Phone:
+46 (0)8 552 422 00
(Mon-Thur 09-12 (GMT+1)

Email:
info@dli-teknik.se
Shipping


Payment
Bank Wire Transfer


Credit card/Paypal
Secure purchases
© 2003-2021 DLI Teknik all rights reserved. | 1024x768 or higher | DLI-Teknik.se By Per Lundin