Transmission -> Clutches -> Audi -> A3 II 1.9TDI 105hp 04-08
Clutch kits

High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can not use the engines power anymore. Even a standard engine finally wear the clutch down and sooner or later need a new one.

Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances. All kits are specified with maximum torque the clutch can handle. But there is also some margin on these specifications to withstand "torque bumps" that can occur.

Most of our kits consist of flywheel, pressure plate, clutch disc, release bearing and bolts.

Many of our kits also replace the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*

A lightweight flywheel also gives less rotating mass and thus a quicker revability which makes your car aceelerate quicker.

All clutch parts comes from Sachs (unless otherwise is stated) and the flywheels are standard VAG or our own special flywheels in chrome moly steel.

PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!

For more info, see the PDF data sheet in the link: PCS

In all kits where a sport clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span.

This is a service we provide for free since we consider this should always be included when buying a clutch kit of quality!

We also offer single Sachs clutches to more brands, see our Spare parts catalogue for all parts!

* = replacement of dual mass flywheel may cause added gear noise.
Clutch Kit Clutch Kit
Prodnr: 2290 601 004

Standard with flywheel

Sachs + LUK

Price: 8430 SEK

Clutch Kit Clutch Kit
Prodnr: 3000 951 120

Standard

LUK flywheel (standard)

Price: 3185 SEK

Clutch Kit Clutch Kit
Prodnr: 3000 970 001

Standard

Sachs flywheel

Price: 3285 SEK

Clutch kit Clutch kit
Prodnr: DLI-0720

~300Nm, torsion

Price: 7240 SEK

Clutch kit Clutch kit
Prodnr: DLI-0721

~390Nm, torsion

Price: 8675 SEK

Clutch kit Clutch kit
Prodnr: DLI-0722

~450Nm, torsion

Price: 10215 SEK

Clutch kit Clutch kit
Prodnr: DLI-0723

~500Nm, torsion

Price: 10115 SEK

Flywheel Flywheel
Prodnr: 2294 000 576

Standard

Sachs

Price: 4860 SEK

Release bearing Release bearing
Prodnr: 3151 000 388

Standard

Price: 535 SEK

Search products
Search product:
Tax free
If you live outside Europe, or within the EU and have a valid VAT number, you can buy tax free.

That means 20% off on all prices!

Contact us for more info.
Sales
We now sell out our stock of Powerflex bushings.

The stock is limited, first comes first served.
Contact info
Phone:
+46 (0)8 552 422 00
(Mon-Thur 09-12/16-17)
GMT+1

E-mail:
info@dli-teknik.se
Shipping
Payment
Paypal
Bank Wire Transfer
© 2003-2013 DLI Teknik all rights reserved. | 1024x768 or higher | DLI-Teknik.se By Per Lundin