|
Clutch kit Prodnr: RCS184-2-S-26-3
Description:
Manufacturer/Brand: Sachs Motorsport
Model:
Not model-adapted clutch. The clutch fits on flywheels intended for 184mm/7,25" motorsport clutch, but all other fitting is the customers own responsibility. Therefore, see the dimensional drawing of the clutch via the pictures below.
If you can provide us with dimensions, according to a drawing we can send out, we can however help you calculate the appropriate thickness of the flywheel, splines combination and the eventual release ring for the release bearing. However, that the calculated flywheel and clutch fits physically in the clutch housing, and works for your intended application, is always the customers own responsibility.
The max torque shown below that can be transmitted is just that, the maximum. That is when the clutch is new and correctly run-in. The more the clutch is worn, the less torque it can transmit. Therefore, choose a clutch with well-added margins in relation to your engines maximum torque.
The kit includes:
Sachs RCS aluminium pressure plate cover, Sachs RCS pressure plate in forged steel, Sachs RCS intermediate plate in forged steel, pressure plate bolts and washers.
Info
Max torque: ~1308Nm
Setup height: 26,4mm +/- 1mm
Total height: 37,1mm
Release load: max 438kg
Weight (with discs): ~3,105kg
Hub/Spline: Disc is not included but purchased separately! See any of these links:
Long Hub: 003, 013, 016, 035, 045, 047, 076, 091, 092, 522, 804, 812, 916, 926, 931, 935, 938, 980
Long Hub: 002, 010, 038, 065, 075, 081, 094, 532, 575, 802, 808, 820, 823, 906, 924, 927, 962
Middle Hub: 013, 047, 091, 092, 804, 931
Middle Hub: 002, 003, 010, 016, 035, 038, 045, 065, 075, 076, 081, 092, 094, 522, 532, 575, 802, 808, 812, 820, 823, 906, 916, 924, 926, 927, 935, 938, 962, 980
Short Hub: 013, 047, 091, 804, 906, 931
Short Hub: 002, 003, 010, 016, 035, 038, 045, 065, 075, 076, 081, 092, 094, 522, 532, 575, 802, 808, 812, 820, 823, 916, 924, 926, 927, 935, 938, 962, 980
Combinations that work together are: Long/Long (L-L), Long/Middle (L-M), Middle/Short (M-K), Middle/Long (M-L), Short/Short (K-K) or Short/Long (K-L)
Remarks: the release bearing for this pressure plate should have a crowned contact surface with a release diameter of 49mm.
For flat release bearing, and/or to adjust the setup height, use any of the following release rings:
Release ring, 5mm
Release ring, 7,5mm
Release ring, 10mm
Release ring, 12,5mm
Release ring, 15mm
Release ring, 20mm
Release ring, 25mm
Release ring, 30mm
Stock type: Stock item
Price: 8992 SEK excl. VAT
| |
|
0 products in cart |
|
1 SEK = 0,089 EUR
1 SEK = 0,096 USD
Or use THIS converter!
|
Phone:
+46 (0)8 552 422 00
(Mon-Thur 09-12)
Email:
info@dli-teknik.se
(Mon-Fri 08-17)
Please do not email large pictures/files! |
|
Bank Wire Transfer
Credit card/Paypal
|
|
|