Transmission -> Clutches -> Bmw -> E46 330d 3.0D 204hp M57D30/M57N306D2 03-05
Clutches / Clutch kits

High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can not use the engines power anymore. Even a standard engine finally wear the clutch down and sooner or later need a new one.

Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances. All kits are specified with maximum torque the clutch can handle. But there is also some margin on these specifications to withstand "torque bumps" that can occur.

Most of our kits consist of flywheel, pressure plate, clutch disc, release bearing and bolts.

Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*

A lightweight flywheel also gives less rotating mass and thus a quicker revability which makes your car accelerate quicker.

All clutch parts comes from Sachs and the flywheels are our own special flywheels in chrome moly steel (unless otherwise is stated).

PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!

For more info, see the PDF data sheet in the link: PCS

In all kits where a PCS sport clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This is a service we provide for free since we consider this should always be included when buying a clutch kit of quality!

* = replacement of dual mass flywheel may cause added gear noise.
Clutch kit Clutch kit
Prodnr: 3000 951 930

Standard

MSRP: 3232 SEK excl. VAT
Price: 2584 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1870

~410Nm*, torsion standard

MSRP: 7776 SEK excl. VAT
Price: 7128 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1870-2

~540Nm*, torsion standard

MSRP: 8264 SEK excl. VAT
Price: 7520 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1871

~530Nm, torsion organic

MSRP: 12476 SEK excl. VAT
Price: 11004 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1872

~540Nm, rigid organic

MSRP: 11904 SEK excl. VAT
Price: 10432 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1873

~530Nm+, torsion sintered 4-paddle

MSRP: 13276 SEK excl. VAT
Price: 11696 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1874

~530Nm+, torsion sintered 6-paddle

MSRP: 12984 SEK excl. VAT
Price: 11412 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1875

~780Nm, rigid sintered 4-paddle

MSRP: 11904 SEK excl. VAT
Price: 10432 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1876

~780Nm, rigid sintered 6-paddle

MSRP: 11904 SEK excl. VAT
Price: 10432 SEK excl. VAT
Disc Disc
Prodnr: 1864999533/101

PCS

MSRP: 3120 SEK excl. VAT
Price: 2496 SEK excl. VAT
Disc Disc
Prodnr: 881864 999532

PCS

MSRP: 3120 SEK excl. VAT
Price: 2496 SEK excl. VAT
Disc Disc
Prodnr: 881864 999533

PCS

MSRP: 3120 SEK excl. VAT
Price: 2496 SEK excl. VAT
Flywheel Flywheel
Prodnr: 2294 501 194

Standard

MSRP: 5912 SEK excl. VAT
Price: 4728 SEK excl. VAT
Flywheel Flywheel
Prodnr: DLI-063724

Single mass

Price: 4544 SEK excl. VAT

Pressure plate Pressure plate
Prodnr: 883082 001243

PCS

MSRP: 3560 SEK excl. VAT
Price: 2848 SEK excl. VAT
Release bearing Release bearing
Prodnr: 3151 600 513

Standard

MSRP: 680 SEK excl. VAT
Price: 544 SEK excl. VAT
Slave Cylinder Slave Cylinder
Prodnr: 6283 600 102

Standard

MSRP: 596 SEK excl. VAT
Price: 476 SEK excl. VAT
Search products
Search product:
Current
2018-06-18

Summer campaign on all parts from Supertech!


See Engine for all the parts we have listed.

But also see Supertechs webpage for everything we can order.
Contact info
Phone:
+46 (0)8 552 422 00
(Mon-Thur 09-12, Mon-Wed 15-16)
GMT+1

E-mail:
info@dli-teknik.se
Shipping
Payment
Bank Wire Transfer


Paypal
Secure purchases
© 2003-2018 DLI Teknik all rights reserved. | 1024x768 or higher | DLI-Teknik.se By Per Lundin