Transmission -> Clutches -> Ford -> Focus II 2.5l 225hp C25KDTD/HYDA 06-08
Clutches / Clutch kits

High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can then not use the full power of the engine anymore. Even with a completely standard engine, the clutch runs out sooner or later and must be replaced.

Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances.

All kits are specified with maximum torque the clutch can handle. However, there is usually always a certain margin on these specifications to be able to handle the specified torque during the entire life of the clutch.

In most clutch kits where a flywheel is included, it is of the single mass type. Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*

A lite flywheel also has less rotating mass, which give a quicker revability and thus makes the car accelerate faster.

All clutch parts come primarily from Sachs and the flywheels are almost always our special flywheels in chrome moly steel. But sometimes there are alternative products to be able to broaden the range.

Sachs PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!

For more info, see the PDF data sheet in the link: PCS

In all kits where a Performance clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This service is included at no extra cost since we consider this should always be included when buying a clutch kit of quality!

* = replacement of dual mass flywheel may cause added gear noise. Read more via the link below:

Dual vs single mass
Bolt kit Bolt kit
Prodnr: 411016110

Standard

MSRP: 336 SEK excl. VAT
Price: 156 SEK excl. VAT
Central slave cylinder Central slave cylinder
Prodnr: 3182 654 217

Standard

MSRP: 1240 SEK excl. VAT
Price: 896 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 951 819

Standard

MSRP: 4560 SEK excl. VAT
Price: 2964 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 990 192

Standard

With release bearing

MSRP: 5796 SEK excl. VAT
Price: 4640 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1350-2

~350Nm*, torsion standard

MSRP: 8936 SEK excl. VAT
Price: 8056 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1351

~465Nm, PCS torsion organic

MSRP: 11504 SEK excl. VAT
Price: 9860 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1351-2

~495Nm, US torsion organic

MSRP: 9788 SEK excl. VAT
Price: 8924 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1352

~495Nm, rigid organic

MSRP: 11748 SEK excl. VAT
Price: 10044 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1353

~600Nm+, PCS torsion sintered 6-paddle

MSRP: 12308 SEK excl. VAT
Price: 10472 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1353-2

~600Nm, US torsion sintered 6-paddle

MSRP: 9788 SEK excl. VAT
Price: 8924 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1354

~690Nm, rigid sintered 6-paddle

MSRP: 11624 SEK excl. VAT
Price: 9952 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1355

~715Nm, rigid sintered 5-paddle

MSRP: 9980 SEK excl. VAT
Price: 9116 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1361

~520Nm+, torsion organic

HD

MSRP: 11756 SEK excl. VAT
Price: 9996 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1362

~520Nm+, rigid organic

HD

MSRP: 11580 SEK excl. VAT
Price: 9860 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1363

~600Nm+, torsion sintered 6-paddle

HD

MSRP: 12560 SEK excl. VAT
Price: 10608 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1364

~775Nm, rigid sintered 6-paddle

HD

MSRP: 11876 SEK excl. VAT
Price: 10088 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1365

~775Nm, rigid sintered 5-paddle

HD

MSRP: 10340 SEK excl. VAT
Price: 9360 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-136X

~1200Nm+, rigid organic

HD

Price: On request

Clutch kit Clutch kit
Prodnr: DLI-136XX

~1500Nm+, rigid sintered

HD

Price: On request

Disc Disc
Prodnr: 881864 999944

PCS

Rigid sintered 4-paddle

MSRP: 3068 SEK excl. VAT
Price: 2456 SEK excl. VAT
Disc Disc
Prodnr: 881864 999991

PCS

Rigid organic

MSRP: 3740 SEK excl. VAT
Price: 3084 SEK excl. VAT
Disc Disc
Prodnr: DLI-4999944

Rigid sintered 5-paddle

Price: 1864 SEK excl. VAT

Flywheel Flywheel
Prodnr: 415031110

Standard

MSRP: 6040 SEK excl. VAT
Price: 4832 SEK excl. VAT
Pressure plate Pressure plate
Prodnr: 883082 001115

PCS

MSRP: 3392 SEK excl. VAT
Price: 2796 SEK excl. VAT
Cart
Varukorg
0 products in cart
Search products
Search product:
Currency converter
1 SEK = 0,092 EUR
1 SEK = 0,097 USD

Or use THIS converter!
Contact info
Phone:
+46 (0)8 552 422 00
(Mon-Thur 09-12)

Email:
info@dli-teknik.se
(Mon-Fri 08-17)
Shipping




Payment
Bank Wire Transfer


Credit card/Paypal
Secure purchases
© 2003-2022 DLI Teknik all rights reserved. | 1024x768 or higher | DLI-Teknik.se By Per Lundin