|
Clutches / Clutch kits
High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can then not use the full power of the engine anymore. Even with a completely standard engine, the clutch runs out sooner or later and must be replaced.
Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances.
All kits are specified with maximum torque the clutch can handle. However, there is usually always a certain margin on these specifications to be able to handle the specified torque during the entire life of the clutch.
In most clutch kits where a flywheel is included, it is of the single mass type. Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*
A lite flywheel also has less rotating mass, which give a quicker revability and thus makes the car accelerate faster.
All clutch parts come primarily from Sachs and the flywheels are almost always our special flywheels in chrome moly steel. But sometimes there are alternative products to be able to broaden the range.
Sachs PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!
For more info, see the PDF data sheet in the link:
PCS
In all kits where a Performance clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This service is included at no extra cost since we consider this should always be included when buying a clutch kit of quality!
* = replacement of dual mass flywheel may cause added gear noise. Read more via the link below:
Dual vs single mass |
|
Bolt kit Prodnr: 411013211
Standard
MSRP: 184 SEK excl. VAT Price: 104 SEK excl. VAT
|
|
|
|
|
|
Clutch kit Prodnr: 3000 951 240
Standard
5-speed
MSRP: 4768 SEK excl. VAT Price: 2876 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: 3000 951 823
Standard
6-speed
MSRP: 4356 SEK excl. VAT Price: 2436 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1600
~265Nm*, torsion standard
5-speed
MSRP: 8436 SEK excl. VAT Price: 7724 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1601
~500Nm, torsion organic
5-speed
MSRP: 11644 SEK excl. VAT Price: 11008 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1602
~525Nm, rigid organic
5-speed
MSRP: 13948 SEK excl. VAT Price: 12304 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1603
~500Nm, torsion sintered 6-paddle
5-speed
MSRP: 11992 SEK excl. VAT Price: 11008 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1604
~775Nm, rigid sintered 4-paddle
5-speed
MSRP: 13904 SEK excl. VAT Price: 12268 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1605
~775Nm, rigid sintered 5-paddle
5-speed
MSRP: 12128 SEK excl. VAT Price: 11332 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1606
~775Nm, rigid sintered 6-paddle
5-speed
MSRP: 13028 SEK excl. VAT Price: 11584 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1660
~300Nm*, rigid standard
6-speed
MSRP: 9200 SEK excl. VAT Price: 8536 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1661
~525Nm, PCS torsion organic
6-speed
MSRP: 13496 SEK excl. VAT Price: 12108 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1661-2
~500Nm, US torsion organic
6-speed
MSRP: 11628 SEK excl. VAT Price: 11008 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1662
~525Nm, PCS rigid organic
6-speed
MSRP: 14472 SEK excl. VAT Price: 12728 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1662-2
~525Nm, DLI rigid organic
6-speed
MSRP: 12300 SEK excl. VAT Price: 11184 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1663
~600Nm+, PCS torsion sintered 6-paddle
6-speed
MSRP: 14336 SEK excl. VAT Price: 12792 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1663-2
~500Nm, US torsion sintered 6-paddle
6-speed
MSRP: 11628 SEK excl. VAT Price: 11008 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1664
~775Nm, rigid sintered 4-paddle
6-speed
MSRP: 14016 SEK excl. VAT Price: 12204 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1665
~775Nm, rigid sintered 5-paddle
6-speed
MSRP: 12184 SEK excl. VAT Price: 11192 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1666
~775Nm, rigid sintered 6-paddle
6-speed
MSRP: 14016 SEK excl. VAT Price: 12204 SEK excl. VAT
|
|
|
|
Disc Prodnr: 1861999501
Torsion sintered 6-paddle
5-speed
Price: 1756 SEK excl. VAT
|
|
|
|
Disc Prodnr: 1861999520
Torsion organic
5-speed
Price: 1756 SEK excl. VAT
|
|
|
|
Disc Prodnr: 1864999501/101
PCS
Rigid sintered 6-paddle
5-speed
MSRP: 2980 SEK excl. VAT Price: 2384 SEK excl. VAT
|
|
|
|
Disc Prodnr: 881864 999501
PCS
Rigid sintered 4-paddle
5-speed
MSRP: 3856 SEK excl. VAT Price: 3084 SEK excl. VAT
|
|
|
|
Disc Prodnr: 881864 999520
PCS
Rigid organic
5-speed
MSRP: 3900 SEK excl. VAT Price: 3120 SEK excl. VAT
|
|
|
|
Disc Prodnr: 881864 999838
PCS
Rigid sintered 4-paddle
6-speed
MSRP: 3772 SEK excl. VAT Price: 3020 SEK excl. VAT
|
|
|
|
Disc Prodnr: 881864 999992
PCS
Rigid organic
6-speed
MSRP: 4440 SEK excl. VAT Price: 3552 SEK excl. VAT
|
|
|
|
Disc Prodnr: DLI-4999501
Rigid sintered 5-paddle
5-speed
Price: 2080 SEK excl. VAT
|
|
|
|
Disc Prodnr: DLI-4999838
Rigid sintered 5-paddle
6-speed
Price: 1940 SEK excl. VAT
|
|
|
|
Disc Prodnr: DLI-4999992
Rigid organic
6-speed
Price: 1896 SEK excl. VAT
|
|
|
|
Flywheel Prodnr: 415023410
Standard
5-speed
MSRP: 12752 SEK excl. VAT Price: 6552 SEK excl. VAT
|
|
|
|
Flywheel Prodnr: 415031910
Standard
6-speed
MSRP: 4396 SEK excl. VAT Price: 2432 SEK excl. VAT
|
|
|
|
Master Cylinder Prodnr: 6284 600 880
Standard
MSRP: 972 SEK excl. VAT Price: 620 SEK excl. VAT
|
|
|
|
Pressure plate Prodnr: 883082 999325
PCS
5-speed
MSRP: 3996 SEK excl. VAT Price: 3196 SEK excl. VAT
|
|
|
|
Pressure plate Prodnr: 883082 999326
PCS
6-speed
MSRP: 3996 SEK excl. VAT Price: 3196 SEK excl. VAT
|
|
|