Transmission -> Clutches -> Saab -> 9-3 III 2.8T 255hp B284L 2WD -08
Clutches / Clutch kits

High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can not use the engines power anymore. Even a standard engine finally wear the clutch down and sooner or later need a new one.

Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances. All kits are specified with maximum torque the clutch can handle. But there is also some margin on these specifications to withstand "torque bumps" that can occur.

Most of our kits consist of flywheel, pressure plate, clutch disc, release bearing and bolts.

Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*

A lightweight flywheel also gives less rotating mass and thus a quicker revability which makes your car accelerate quicker.

All clutch parts comes from Sachs and the flywheels are our own special flywheels in chrome moly steel (unless otherwise is stated).

PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!

For more info, see the PDF data sheet in the link: PCS

In all kits where a PCS sport clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This is a service we provide for free since we consider this should always be included when buying a clutch kit of quality!

* = replacement of dual mass flywheel may cause added gear noise.
Bolt kit Bolt kit
Prodnr: 411016310


MSRP: 176 SEK excl. VAT
Price: 140 SEK excl. VAT
Central slave cylinder Central slave cylinder
Prodnr: 3182 654 193


MSRP: 2152 SEK excl. VAT
Price: 1000 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 951 199


MSRP: 3184 SEK excl. VAT
Price: 2024 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1630

~400Nm*, rigid standard

MSRP: 7452 SEK excl. VAT
Price: 6944 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1631

~520Nm, torsion organic

MSRP: 11536 SEK excl. VAT
Price: 10092 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1632

~520Nm, rigid organic

MSRP: 12224 SEK excl. VAT
Price: 10628 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1633

~600Nm, torsion sintered 4-paddle

Price: On request

Clutch kit Clutch kit
Prodnr: DLI-1634

~600Nm, torsion sintered 6-paddle

MSRP: 12300 SEK excl. VAT
Price: 10688 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1635

~770Nm, rigid sintered 4-paddle

MSRP: 11644 SEK excl. VAT
Price: 10176 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1636-5

~770Nm, rigid sintered 5-paddle

MSRP: 10184 SEK excl. VAT
Price: 9424 SEK excl. VAT
Disc Disc
Prodnr: 881864 999838


MSRP: 3248 SEK excl. VAT
Price: 2540 SEK excl. VAT
Disc Disc
Prodnr: 881864 999992


MSRP: 3828 SEK excl. VAT
Price: 2992 SEK excl. VAT
Disc Disc
Prodnr: DLI-4999838

5-paddle rigid

Price: 1788 SEK excl. VAT

Flywheel Flywheel
Prodnr: 415026710


MSRP: 8328 SEK excl. VAT
Price: 4084 SEK excl. VAT
Pressure plate Pressure plate
Prodnr: 883082 001783


MSRP: 3476 SEK excl. VAT
Price: 2716 SEK excl. VAT
0 products in cart
Search products
Search product:
Currency converter
1 SEK = 0,097 EUR
1 SEK = 0,088 GBP
1 SEK = 0,114 USD

Or use THIS converter!
Contact info
+46 (0)8 552 422 00
(Mon-Thur 09-12 (GMT+1)

Bank Wire Transfer

Credit card/Paypal
Secure purchases
© 2003-2020 DLI Teknik all rights reserved. | 1024x768 or higher | By Per Lundin