Transmission -> Clutches -> Volvo -> S60 2.5T 300hp B5254T4 03-08
Clutches / Clutch kits

High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can then not use the full power of the engine anymore. Even with a completely standard engine, the clutch runs out sooner or later and must be replaced.

Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances.

All kits are specified with maximum torque the clutch can handle. However, there is usually always a certain margin on these specifications to be able to handle the specified torque during the entire life of the clutch.

In most clutch kits where a flywheel is included, it is of the single mass type. Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*

A lite flywheel also has less rotating mass, which give a quicker revability and thus makes the car accelerate faster.

All clutch parts come primarily from Sachs and the flywheels are almost always our special flywheels in chrome moly steel. But sometimes there are alternative products to be able to broaden the range.

Sachs PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!

For more info, see the PDF data sheet in the link: PCS

In all kits where a Performance clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This service is included at no extra cost since we consider this should always be included when buying a clutch kit of quality!

* = replacement of dual mass flywheel may cause added gear noise. Read more via the link below:

Dual vs single mass
Bolt kit Bolt kit
Prodnr: 411016110

Standard

MSRP: 336 SEK excl. VAT
Price: 156 SEK excl. VAT
Central slave cylinder Central slave cylinder
Prodnr: 3182 600 235

Standard

MSRP: 1316 SEK excl. VAT
Price: 916 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 951 193

Standard

Model year to : 2005

MSRP: 3780 SEK excl. VAT
Price: 2788 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 951 193+15

Standard +15%

Model year to : 2005

MSRP: 4684 SEK excl. VAT
Price: 3748 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 951 813

Standard

Model year from : 2006

MSRP: 3780 SEK excl. VAT
Price: 2624 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 951 813+15

Standard +15%

Model year from : 2006

MSRP: 4684 SEK excl. VAT
Price: 3748 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1770

~400Nm*, torsion standard

MSRP: 8932 SEK excl. VAT
Price: 8236 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1770-2

~460Nm*, torsion standard

MSRP: 10356 SEK excl. VAT
Price: 9376 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1771

~465Nm, torsion organic

MSRP: 11504 SEK excl. VAT
Price: 9860 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1772

~465Nm, rigid organic

MSRP: 11328 SEK excl. VAT
Price: 9724 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1773

~600Nm, torsion sintered 6-paddle

MSRP: 12308 SEK excl. VAT
Price: 10472 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1774

~690Nm, rigid sintered 6-paddle

MSRP: 11624 SEK excl. VAT
Price: 9952 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1775

~690Nm, rigid sintered 5-paddle

MSRP: 10088 SEK excl. VAT
Price: 9224 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1781

~520Nm+, torsion organic

HD

MSRP: 11756 SEK excl. VAT
Price: 9996 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1782

~520Nm+, rigid organic

HD

MSRP: 11580 SEK excl. VAT
Price: 9860 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1783

~600Nm+, torsion sintered 6-paddle

HD

MSRP: 12560 SEK excl. VAT
Price: 10608 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1784

~775Nm, rigid sintered 6-paddle

HD

MSRP: 11876 SEK excl. VAT
Price: 10088 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1785

~775Nm, rigid sintered 5-paddle

HD

MSRP: 10340 SEK excl. VAT
Price: 9360 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-178X

~1200Nm+, rigid organic

HD

Price: On request

Clutch kit Clutch kit
Prodnr: DLI-178XX

~1500Nm+, rigid sintered

HD

Price: On request

Disc Disc
Prodnr: 881864 999944

PCS

Model year from : 2006

MSRP: 3068 SEK excl. VAT
Price: 2456 SEK excl. VAT
Disc Disc
Prodnr: 881864 999991

PCS

Model year from : 2006

MSRP: 3740 SEK excl. VAT
Price: 3084 SEK excl. VAT
Disc Disc
Prodnr: DLI-4999944

5-paddle rigid

Model year from : 2006

Price: 1864 SEK excl. VAT

Flywheel Flywheel
Prodnr: 415031210

Standard

To eng.no 3735358

MSRP: 9408 SEK excl. VAT
Price: 7528 SEK excl. VAT
Flywheel Flywheel
Prodnr: 415031310

Standard

From eng.no 3735359

Price: On request

Master Cylinder Master Cylinder
Prodnr: 6284 605 043

Standard

MSRP: 1756 SEK excl. VAT
Price: 1268 SEK excl. VAT
Pressure plate Pressure plate
Prodnr: 883082 001115

PCS

Model year from : 2006

MSRP: 3392 SEK excl. VAT
Price: 2796 SEK excl. VAT
Cart
Varukorg
0 products in cart
Search products
Search product:
Currency converter
1 SEK = 0,092 EUR
1 SEK = 0,097 USD

Or use THIS converter!
Contact info
Phone:
+46 (0)8 552 422 00
(Mon-Thur 09-12)

Email:
info@dli-teknik.se
(Mon-Fri 08-17)
Shipping




Payment
Bank Wire Transfer


Credit card/Paypal
Secure purchases
© 2003-2022 DLI Teknik all rights reserved. | 1024x768 or higher | DLI-Teknik.se By Per Lundin