|
Clutches / Clutch kits
High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can then not use the full power of the engine anymore. Even with a completely standard engine, the clutch runs out sooner or later and must be replaced.
Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances.
All kits are specified with maximum torque the clutch can handle. However, there is usually always a certain margin on these specifications to be able to handle the specified torque during the entire life of the clutch.
In most clutch kits where a flywheel is included, it is of the single mass type. Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*
A lite flywheel also has less rotating mass, which give a quicker revability and thus makes the car accelerate faster.
All clutch parts come primarily from Sachs and the flywheels are almost always our special flywheels in chrome moly steel. But sometimes there are alternative products to be able to broaden the range.
Sachs PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!
For more info, see the PDF data sheet in the link:
PCS
In all kits where a Performance clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This service is included at no extra cost since we consider this should always be included when buying a clutch kit of quality!
* = replacement of dual mass flywheel may cause added gear noise. Read more via the link below:
Dual vs single mass
|
|
Bolt kit
Prodnr: 411016110
Standard
MSRP: 392 SEK excl. VAT
Price: 216 SEK excl. VAT
|
|
|
| |
|
Clutch kit
Prodnr: 3000 951 814
Standard
MSRP: 5604 SEK excl. VAT
Price: 4484 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: DLI-1750-2
~440Nm*, torsion standard
MSRP: 8544 SEK excl. VAT
Price: 7588 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1751
~480Nm, PCS torsion organic
MSRP: 12420 SEK excl. VAT
Price: 10552 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1751-3
~480Nm, US torsion organic
MSRP: 10472 SEK excl. VAT
Price: 9412 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1753
~600/700Nm, PCS torsion sintered 6-paddle
MSRP: 13308 SEK excl. VAT
Price: 11248 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1753-2
~500/700Nm, US torsion sintered 6-paddle
MSRP: 10472 SEK excl. VAT
Price: 9412 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1754
~700Nm, rigid sintered 4-paddle
MSRP: 12420 SEK excl. VAT
Price: 10552 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1755
~700Nm, rigid sintered 5-paddle
MSRP: 10812 SEK excl. VAT
Price: 9672 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1756
~700Nm, rigid sintered 6-paddle
MSRP: 12556 SEK excl. VAT
Price: 10660 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: DLI-1761
~520Nm+, PCS torsion organic
HD
MSRP: 12968 SEK excl. VAT
Price: 10984 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1761-2
~500/520Nm+, US torsion organic
HD
MSRP: 11020 SEK excl. VAT
Price: 9844 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1762
~520Nm+, rigid organic
HD
MSRP: 12876 SEK excl. VAT
Price: 10916 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1763
~600/775Nm, PCS torsion sintered 6-paddle
HD
MSRP: 13856 SEK excl. VAT
Price: 11680 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1763-2
~500/775Nm, US torsion sintered 6-paddle
HD
MSRP: 11020 SEK excl. VAT
Price: 9844 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1765
~775Nm, rigid sintered 5-paddle
HD
MSRP: 11400 SEK excl. VAT
Price: 10144 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1766
~775Nm, rigid sintered 6-paddle
HD
MSRP: 13104 SEK excl. VAT
Price: 11092 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: GKS-176x
~950Nm, torsion organic
Price: On request
|
|
|
|
Clutch kit
Prodnr: GKS-176xx
~1200Nm, torsion sintered
Price: On request
|
|
|
|
Clutch kit
Prodnr: RKS-176X
~730-1800Nm+, rigid organic
Price: On request
|
|
|
|
Clutch kit
Prodnr: RKS-176XX
~800-1990Nm+, rigid sintered paddle
Price: On request
|
|
|
|
Disc
Prodnr: 881864 001098
PCS
Rigid organic
MSRP: 4084 SEK excl. VAT
Price: 3196 SEK excl. VAT
|
|
|
|
Disc
Prodnr: 881864 999944
PCS
Rigid sintered 4-paddle
MSRP: 3704 SEK excl. VAT
Price: 2896 SEK excl. VAT
|
|
|
|
Disc
Prodnr: DLI-4001098
Rigid organic
Price: 1860 SEK excl. VAT
|
|
|
|
Disc
Prodnr: DLI-4999944
Rigid sintered 5-paddle
Price: 2016 SEK excl. VAT
|
|
|
|
Flywheel
Prodnr: 415031110
Standard
MSRP: 9744 SEK excl. VAT
Price: 5880 SEK excl. VAT
|
|
|
|
|
Flywheel
Prodnr: DLI-060311
Single mass
Price: 4460 SEK excl. VAT
|
|
|
|
Master Cylinder
Prodnr: 6284 605 043
Standard
MSRP: 2328 SEK excl. VAT
Price: 1400 SEK excl. VAT
|
|
|
|
Pressure plate
Prodnr: 883082 001115
PCS
MSRP: 4084 SEK excl. VAT
Price: 3196 SEK excl. VAT
|
|
|
|
Seal
Prodnr: 9458178
Crankshaft, rear towards gearbox
MSRP: 232 SEK excl. VAT
Price: 200 SEK excl. VAT
|
|
|
