|
Clutches / Clutch kits
High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can then not use the full power of the engine anymore. Even with a completely standard engine, the clutch runs out sooner or later and must be replaced.
Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances.
All kits are specified with maximum torque the clutch can handle. However, there is usually always a certain margin on these specifications to be able to handle the specified torque during the entire life of the clutch.
In most clutch kits where a flywheel is included, it is of the single mass type. Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*
A lite flywheel also has less rotating mass, which give a quicker revability and thus makes the car accelerate faster.
All clutch parts come primarily from Sachs and the flywheels are almost always our special flywheels in chrome moly steel. But sometimes there are alternative products to be able to broaden the range.
Sachs PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!
For more info, see the PDF data sheet in the link:
PCS
In all kits where a Performance clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This service is included at no extra cost since we consider this should always be included when buying a clutch kit of quality!
* = replacement of dual mass flywheel may cause added gear noise. Read more via the link below:
Dual vs single mass
|
| |
|
Clutch kit
Prodnr: 3000 951 091
Standard
MSRP: 3664 SEK excl. VAT
Price: 2260 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: 3000 990 232
Standard
With release bearing
MSRP: 4616 SEK excl. VAT
Price: 2740 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: 883089 000052
~550Nm, torsion organic
~7,5kg flywheel
MSRP: 16124 SEK excl. VAT
Price: 12900 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: 883089 000053
~600Nm+, torsion sintered 4-paddle
~7,5kg flywheel
MSRP: 16804 SEK excl. VAT
Price: 13444 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: 883089 000054
~800Nm, rigid sintered 4-paddle
~7,5kg flywheel
MSRP: 16296 SEK excl. VAT
Price: 13040 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: DLI-0530
~320Nm*, rigid standard
~4,5kg flywheel
MSRP: 8120 SEK excl. VAT
Price: 6752 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-0530-2
~320Nm*, torsion standard
~4,5kg flywheel
MSRP: 8996 SEK excl. VAT
Price: 7576 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-0532
~510Nm, rigid organic
~4,5kg flywheel
MSRP: 12384 SEK excl. VAT
Price: 10808 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-0532-2
~510Nm, torsion organic
~4,5kg flywheel
MSRP: 12696 SEK excl. VAT
Price: 11056 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: DLI-0533
~550Nm, torsion organic
~5kg flywheel
MSRP: 12212 SEK excl. VAT
Price: 10596 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-0534
~600Nm+, torsion sintered 4-paddle
~5kg flywheel
MSRP: 12868 SEK excl. VAT
Price: 11120 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-0535
~750Nm, rigid sintered 4-paddle
~4,5kg flywheel
MSRP: 12696 SEK excl. VAT
Price: 11056 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-0535-2
~750Nm, rigid sintered 5-paddle
~4,5kg flywheel
MSRP: 10772 SEK excl. VAT
Price: 10072 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-0536-2
~800Nm, rigid sintered 4-paddle
~5kg flywheel
MSRP: 12340 SEK excl. VAT
Price: 10696 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-0536-5
~800Nm, rigid sintered 5-paddle
~5kg flywheel
MSRP: 10472 SEK excl. VAT
Price: 9680 SEK excl. VAT
|
|
|
|
Clutch kit
Prodnr: DLI-1430
~320Nm*, rigid standard
~8kg flywheel
MSRP: 8136 SEK excl. VAT
Price: 6620 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1430-2
~320Nm*, torsion standard
~8kg flywheel
MSRP: 9172 SEK excl. VAT
Price: 8176 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1431
~355Nm*, torsion standard
~8kg flywheel
MSRP: 10904 SEK excl. VAT
Price: 9564 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1432
~540Nm, torsion organic
~8kg flywheel
MSRP: 12628 SEK excl. VAT
Price: 10988 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1433
~540Nm, rigid organic
~8kg flywheel
MSRP: 12316 SEK excl. VAT
Price: 10740 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1434
~600Nm+, torsion sintered 4-paddle
~8kg flywheel
MSRP: 13284 SEK excl. VAT
Price: 11512 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1435
~795Nm, rigid sintered 4-paddle
~8kg flywheel
MSRP: 12628 SEK excl. VAT
Price: 10988 SEK excl. VAT
|
|
|
|
|
Clutch kit
Prodnr: DLI-1435-2
~795Nm, rigid sintered 5-paddle
~8kg flywheel
MSRP: 10704 SEK excl. VAT
Price: 10004 SEK excl. VAT
|
|
|
|
Disc
Prodnr: 1878 004 698
Standard
MSRP: 2644 SEK excl. VAT
Price: 1532 SEK excl. VAT
|
|
|
|
Disc
Prodnr: 881864 001490
PCS
Rigid sintered 4-paddle
MSRP: 3900 SEK excl. VAT
Price: 3120 SEK excl. VAT
|
|
|
|
Disc
Prodnr: 881864 999980
PCS
Rigid organic
MSRP: 4028 SEK excl. VAT
Price: 3220 SEK excl. VAT
|
|
|
|
Disc
Prodnr: DLI-4001490
Rigid sintered 5-paddle
Price: 2136 SEK excl. VAT
|
|
|
|
Flywheel
Prodnr: 415011110
Standard
Chassis number to 3#050000
MSRP: 6444 SEK excl. VAT
Price: 5156 SEK excl. VAT
|
|
|
|
|
Flywheel
Prodnr: DLI-060632
Single mass
~4,5kg
Price: 4492 SEK excl. VAT
|
|
|
|
Flywheel
Prodnr: DLI-060632H
Single mass
~8kg
Price: 4900 SEK excl. VAT
|
|
|
|
Pressure plate
Prodnr: 883082 000827
PCS
MSRP: 4304 SEK excl. VAT
Price: 3444 SEK excl. VAT
|
|
|
