|
Clutches / Clutch kits
High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can then not use the full power of the engine anymore. Even with a completely standard engine, the clutch runs out sooner or later and must be replaced.
Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances.
All kits are specified with maximum torque the clutch can handle. However, there is usually always a certain margin on these specifications to be able to handle the specified torque during the entire life of the clutch.
In most clutch kits where a flywheel is included, it is of the single mass type. Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*
A lite flywheel also has less rotating mass, which give a quicker revability and thus makes the car accelerate faster.
All clutch parts come primarily from Sachs and the flywheels are almost always our special flywheels in chrome moly steel. But sometimes there are alternative products to be able to broaden the range.
Sachs PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!
For more info, see the PDF data sheet in the link:
PCS
In all kits where a Performance clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This service is included at no extra cost since we consider this should always be included when buying a clutch kit of quality!
* = replacement of dual mass flywheel may cause added gear noise. Read more via the link below:
Dual vs single mass |
|
Clutch kit Prodnr: DLI-1300
~385Nm, PCS torsion organic
MSRP: 11884 SEK excl. VAT Price: 10288 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1300-2
~385Nm, US torsion organic
MSRP: 9992 SEK excl. VAT Price: 9124 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1301
~565Nm, PCS torsion sintered 6-paddle
MSRP: 12756 SEK excl. VAT Price: 11060 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1301-2
~565Nm, US torsion sintered 6-paddle
MSRP: 9992 SEK excl. VAT Price: 9124 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1302
~565Nm, rigid sintered 6-paddle
MSRP: 12008 SEK excl. VAT Price: 10388 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1302-5
~565Nm, rigid sintered 5-paddle
MSRP: 10212 SEK excl. VAT Price: 9504 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1303
~550Nm+, PCS torsion organic
HD
MSRP: 12584 SEK excl. VAT Price: 10956 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1303-2
~500Nm, US torsion organic
HD
MSRP: 10692 SEK excl. VAT Price: 9792 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1304
~600Nm+, PCS torsion sintered 6-paddle
HD
MSRP: 13456 SEK excl. VAT Price: 11728 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1304-2
~500Nm, US torsion sintered 6-paddle
HD
MSRP: 10692 SEK excl. VAT Price: 9792 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1305
~590Nm, rigid organic
HD
MSRP: 12652 SEK excl. VAT Price: 11008 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1306
~860Nm, rigid sintered 6-paddle
HD
MSRP: 12708 SEK excl. VAT Price: 11056 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-1306-5
~860Nm, rigid sintered 5-paddle
HD
MSRP: 10912 SEK excl. VAT Price: 10172 SEK excl. VAT
|
|
|
|
Clutch kit Prodnr: DLI-130X
~1200Nm+, rigid organic
HD
Price: On request
|
|
|
|
Clutch kit Prodnr: DLI-130XX
~1500Nm+, rigid sintered
HD
Price: On request
|
|
|
|
Disc Prodnr: 881861 999858
PCS
Torsion sintered 6-paddle
MSRP: 4612 SEK excl. VAT Price: 3692 SEK excl. VAT
|
|
|
|
Disc Prodnr: 881861 999864
PCS
Torsion organic
MSRP: 3648 SEK excl. VAT Price: 2920 SEK excl. VAT
|
|
|
|
Disc Prodnr: 881864 002522
PCS
Rigid organic
MSRP: 3556 SEK excl. VAT Price: 2844 SEK excl. VAT
|
|
|
|
Disc Prodnr: 881864 999500
PCS
Rigid sintered 6-paddle
MSRP: 3772 SEK excl. VAT Price: 3020 SEK excl. VAT
|
|
|
|
Disc Prodnr: DLI-4999500
Rigid sintered 5-paddle
Price: 2136 SEK excl. VAT
|
|
|
|
Pressure plate Prodnr: 883082 999695
PCS
MSRP: 4084 SEK excl. VAT Price: 3268 SEK excl. VAT
|
|
|
|
Pressure plate Prodnr: 883082 999765
PCS
DLI or machined flywheel
MSRP: 4244 SEK excl. VAT Price: 3396 SEK excl. VAT
|
|
|
|
Release bearing Prodnr: 3151 600 720
Standard
MSRP: 588 SEK excl. VAT Price: 204 SEK excl. VAT
|
|
|