Transmission -> Clutches -> Ford -> Focus II 2.5l 305hp C25KDTD/JZDA 09-11
Clutches / Clutch kits

High power puts stress on the clutch which job is to transfer the engines torque to the transmission. Too much load makes the clutch slip and you can then not use the full power of the engine anymore. Even with a completely standard engine, the clutch runs out sooner or later and must be replaced.

Our clutch kits are adapted to handle everything from stock power and torque to pure racing engines, and are therefore available in several different performances.

All kits are specified with maximum torque the clutch can handle. However, there is usually always a certain margin on these specifications to be able to handle the specified torque during the entire life of the clutch.

In most clutch kits where a flywheel is included, it is of the single mass type. Many of our kits therefore replaces the so often poor dual mass flywheel with a durably single mass lightweight flywheel in chrome moly steel.*

A lite flywheel also has less rotating mass, which give a quicker revability and thus makes the car accelerate faster.

All clutch parts come primarily from Sachs and the flywheels are almost always our special flywheels in chrome moly steel. But sometimes there are alternative products to be able to broaden the range.

Sachs PCS stands for Performance Clutch Systems, which means that the product are designed to withstand higher power/torque than standard. This is NOT rebuilt/painted original pressure plates or discs, but performance parts from the very beginning!

For more info, see the PDF data sheet in the link: PCS

In all kits where a Performance clutch is used we measure the pressure plates clamp load and working travel. We can then if necessary shim the preload for maximum pressure and optimal life-span. This service is included at no extra cost since we consider this should always be included when buying a clutch kit of quality!

* = replacement of dual mass flywheel may cause added gear noise. Read more via the link below:

Dual vs single mass
Bolt kit Bolt kit
Prodnr: 411016110

Standard

MSRP: 284 SEK excl. VAT
Price: 152 SEK excl. VAT
Central slave cylinder Central slave cylinder
Prodnr: 3182 654 217

Standard

MSRP: 1212 SEK excl. VAT
Price: 792 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 951 815

Standard

MSRP: 3692 SEK excl. VAT
Price: 2604 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: 3000 990 250

Standard

With release bearing

MSRP: 4900 SEK excl. VAT
Price: 3392 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1330

~440Nm*, rigid standard

MSRP: 7200 SEK excl. VAT
Price: 6548 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1331

~465Nm, torsion organic

MSRP: 10252 SEK excl. VAT
Price: 8992 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1332

~465Nm, rigid organic

MSRP: 10180 SEK excl. VAT
Price: 8936 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1333

~600Nm, torsion sintered 6-paddle

MSRP: 10980 SEK excl. VAT
Price: 9576 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1334

~690Nm, rigid sintered 4-paddle

MSRP: 10352 SEK excl. VAT
Price: 9076 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1335

~690Nm, rigid sintered 5-paddle

MSRP: 9152 SEK excl. VAT
Price: 8492 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1341

~520Nm+, torsion organic

HD

MSRP: 10948 SEK excl. VAT
Price: 9596 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1342

~520Nm+, rigid organic

HD

MSRP: 10876 SEK excl. VAT
Price: 9544 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1343

~600Nm+, torsion sintered 6-paddle

HD

MSRP: 11676 SEK excl. VAT
Price: 10184 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1344

~775Nm, rigid sintered 4-paddle

HD

MSRP: 11048 SEK excl. VAT
Price: 9684 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-1345

~775Nm, rigid sintered 5-paddle

HD

MSRP: 9848 SEK excl. VAT
Price: 9100 SEK excl. VAT
Clutch kit Clutch kit
Prodnr: DLI-134X

~1180Nm, rigid organic

HD

Price: On request

Clutch kit Clutch kit
Prodnr: DLI-134X

~1720Nm, rigid sintered

HD

Price: On request

Disc Disc
Prodnr: 881864 999944

PCS

MSRP: 2996 SEK excl. VAT
Price: 2396 SEK excl. VAT
Disc Disc
Prodnr: 881864 999991

PCS

MSRP: 3652 SEK excl. VAT
Price: 2920 SEK excl. VAT
Disc Disc
Prodnr: DLI-4999944

5-paddle rigid

Price: 1788 SEK excl. VAT

Flywheel Flywheel
Prodnr: 415073510

Standard

MSRP: 5332 SEK excl. VAT
Price: 4264 SEK excl. VAT
Flywheel Flywheel
Prodnr: DLI-061412-3

Single mass

Price: 3968 SEK excl. VAT

Master Cylinder Master Cylinder
Prodnr: 6284 605 068

Standard

MSRP: 1692 SEK excl. VAT
Price: 812 SEK excl. VAT
Pressure plate Pressure plate
Prodnr: 883082 001115

PCS

MSRP: 3312 SEK excl. VAT
Price: 2652 SEK excl. VAT
Cart
Varukorg
0 products in cart
Disruption
We currently have some disruptions in the web shop.

See the start page for more information.
Search products
Search product:
Currency converter
1 SEK = 0,098 EUR
1 SEK = 0,084 GBP
1 SEK = 0,116 USD

Or use THIS converter!
Contact info
Phone:
+46 (0)8 552 422 00
(Mon-Thur 09-12 (GMT+1)

Email:
info@dli-teknik.se
Shipping


Payment
Bank Wire Transfer


Credit card/Paypal
Secure purchases
© 2003-2021 DLI Teknik all rights reserved. | 1024x768 or higher | DLI-Teknik.se By Per Lundin